3104saiki3104saiki

可動 バニーガール素体 bunny girl body

受付後生産を開始し、発送は12月ころの予定です。 Production will start after reception, and shipping is scheduled from December. 1/10~1/12くらいのサイズの可動素体です。 別商品の基本素体を元にバニースーツのディティールを加えたバリエーション素体です。 股関節をスライド関節にし、出来る限り隙間を抑えるようにしてみました。 フレームアームズガールくらい頭部でぴったり、figma等の1/12だと頭身高めな感じになります。 サイズ感は写真を参照してください。 成形色は薄いピンク色の肌色で、未着色の組立キットです。以前の整形色から変更しています。耳やカフスなどは白で行っています。 また、パーツ形状も全体的に見直し左右対称性を高めています。 写真を参照して下さい。耳やカフスなどは白で行っています。 未着色の組立キットとなります。 手流し複製の為、ガレージキット作成経験のある方でないと戸惑う部分が有るかもしれません The molding color is light pink skin tone, and it is an uncolored assembly kit. It has changed from the previous shaping color. The ears and cuffs are molded in white. In addition, the shape of the parts has been reviewed as a whole to improve left-right symmetry. Please refer to the photo. Due to manual duplication, it may be difficult to make unless you have experience in making garage kits. 本商品には頭部及び関節パーツは付属致しません。 別途ご用意ください 3mm径の物を持てるように持ち手も付けてみました。 ロール軸の有る太腿と素足パーツも付属します。 Head and joint parts are not included with this product. Please prepare separately. 別途必要な市販の球体ジョイントの最低使用数です。 This is the minimum number of commercially available spherical joints that are required separately. 4㎜球 2 6mm球 5 10mm球 2 5mm接続用ボール 37 関節技スリム6mm  2セット 関節技スリム8mm  2セット 手持ちにない場合は下記の分必要です。 If you do not have it, you will need the following parts. ・PPC-Tn27 関節技 球体ジョイントミニ ライトフレッシュ 1枚 ・PPC-Tn12 関節技 球体ジョイント ライトフレッシュ 1枚 ・PPC-Tn18 関節技 球体ジョイントスリム ライトフレッシュ 1枚 If you don't have 「PPC-Tn18 関節技 球体ジョイントスリム」, use ↓. ・PPC-Tn111 関節技 フィギュアジョイント ライトフレッシュ 1枚 You can purchase and transfer kits from overseas at tenso.com. https://www.tenso.com/en/static/lp_shop_booth It is necessary to purchase joint parts separately, but tenso seems to be able to ship products purchased from Japanese mail order sites. You can purchase joint parts here. http://shop.yellowsubmarine.co.jp/ よろしくお願いいたします!

受付後生産を開始し、発送は12月ころの予定です。 Production will start after reception, and shipping is scheduled from December. 1/10~1/12くらいのサイズの可動素体です。 別商品の基本素体を元にバニースーツのディティールを加えたバリエーション素体です。 股関節をスライド関節にし、出来る限り隙間を抑えるようにしてみました。 フレームアームズガールくらい頭部でぴったり、figma等の1/12だと頭身高めな感じになります。 サイズ感は写真を参照してください。 成形色は薄いピンク色の肌色で、未着色の組立キットです。以前の整形色から変更しています。耳やカフスなどは白で行っています。 また、パーツ形状も全体的に見直し左右対称性を高めています。 写真を参照して下さい。耳やカフスなどは白で行っています。 未着色の組立キットとなります。 手流し複製の為、ガレージキット作成経験のある方でないと戸惑う部分が有るかもしれません The molding color is light pink skin tone, and it is an uncolored assembly kit. It has changed from the previous shaping color. The ears and cuffs are molded in white. In addition, the shape of the parts has been reviewed as a whole to improve left-right symmetry. Please refer to the photo. Due to manual duplication, it may be difficult to make unless you have experience in making garage kits. 本商品には頭部及び関節パーツは付属致しません。 別途ご用意ください 3mm径の物を持てるように持ち手も付けてみました。 ロール軸の有る太腿と素足パーツも付属します。 Head and joint parts are not included with this product. Please prepare separately. 別途必要な市販の球体ジョイントの最低使用数です。 This is the minimum number of commercially available spherical joints that are required separately. 4㎜球 2 6mm球 5 10mm球 2 5mm接続用ボール 37 関節技スリム6mm  2セット 関節技スリム8mm  2セット 手持ちにない場合は下記の分必要です。 If you do not have it, you will need the following parts. ・PPC-Tn27 関節技 球体ジョイントミニ ライトフレッシュ 1枚 ・PPC-Tn12 関節技 球体ジョイント ライトフレッシュ 1枚 ・PPC-Tn18 関節技 球体ジョイントスリム ライトフレッシュ 1枚 If you don't have 「PPC-Tn18 関節技 球体ジョイントスリム」, use ↓. ・PPC-Tn111 関節技 フィギュアジョイント ライトフレッシュ 1枚 You can purchase and transfer kits from overseas at tenso.com. https://www.tenso.com/en/static/lp_shop_booth It is necessary to purchase joint parts separately, but tenso seems to be able to ship products purchased from Japanese mail order sites. You can purchase joint parts here. http://shop.yellowsubmarine.co.jp/ よろしくお願いいたします!